Lotus LED Lights - 24 Volt DC - Gimbal LED Downlight - 20 Degree Tilt - 360 Degree Rotation - 2700K - White Finish

2 Inch EYEBALL GIMBAL LED RECESSED LIGHTING 5W

This Fixture needs to be ordered with the additional 24V driver LBL-DC24V96W
LLL2G24V are meant to be hard wired with a 24V driver only - no connectors are provided
Gimbal Yet Air-Tight Without Housing Needed. Patented in USA and Canada

5 Watt - 430 Lumens - 3000 Kelvin - White Trim - Wet Location - 90 CRI - LL2G24V-30K-WH

• ModelLL2G
• cULus Listed, Energy Starand T24 Certified
• Type IC Rated - Approved for Direct Contact with Insulation
• Air-Tight, Wet Location, Insulated and Non Insulated Ceilings
• Superb Light Quality with CRI 90+
• Triac dimmable with most CL Dimmers (120V input model only)
• Recessed Housing is NOT Required even for Insulated Ceilings
• Warranty: 10 Year on Residential, 5 Year on Commercial Installations

CONSTRUCTION:
Round 2 Inch Gimbal fixtures with integral LEDs. Class 2 Isolated external driver factory installed inside junction box.
One driver for every fixture required.

MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips.
Ceiling Clearance Required: 1 1/2 Inch with driver remotely installed, 5 Inch if driver is next to the fixture.

• Default Driver Input Voltage: 120V AC 60 Hz (Dimmable)
• 24V DC model Input Voltage: 20-28V DC (Not Dimmable)
• Power factor: > 0.95
• Energy Used: 5W
• Halogen equivalent: 35W
• Beam Angle: 24° Beam with 20° tilt and 360° rotation
• Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
• Compliance: ULus approved, certified toCSASTD. C22.2 No. 250.0
• Rated:Type IC(Direct Contact with Insulation),Energy Star,T24,Air-Tight

DIMENSIONS:

• ID 2 Inch, OD 2 1/2 Inch; Thickness 1 1/2 Inch
• Cut out: 2 Inch to 2 1/8 Inch
• Junction Box Dimensions (with driver inside): 3 3/4 Inch x 2 Inch x 1 3/4 Inch

Suitable for wet locations and soffit installations.

Gimbal Yet Air-Tight Without Housing Needed. Patented in USA and Canada

5 Watt - 380 Lumens - 2700 Kelvin - White Trim - Wet Location - 90 CRI - LL2G24V-27K-WH

• ModelLL2G
• cULus Listed, Energy Starand T24 Certified
• Type IC Rated - Approved for Direct Contact with Insulation
• Air-Tight, Wet Location, Insulated and Non Insulated Ceilings
• Superb Light Quality with CRI 90+
• Triac dimmable with most CL Dimmers (120V input model only)
• RecessedHousing is NOT Required even for Insulated Ceilings
• Warranty: 10 Year on Residential, 5 Year on Commercial Installations

CONSTRUCTION:
Round 2 Inch Gimbal fixtures with integral LEDs. Class 2 Isolated external driver factory installed inside junction box.
One driver for every fixture required.

MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips.
Ceiling Clearance Required: 1 1/2 Inch with driver remotely installed, 5 Inch if driver is next to the fixture..

• Default Driver Input Voltage: 120V AC 60 Hz (Dimmable)
• 24V DC model Input Voltage: 20-28V DC (Not Dimmable)
• Power factor: > 0.95
• Energy Used: 5W
• Halogen equivalent: 35W
• Beam Angle: 24° Beam with 20° tilt and 360° rotation
• Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
• Compliance: ULus approved, certified toCSASTD. C22.2 No. 250.0
• Rated:Type IC(Direct Contact with Insulation),Energy Star,T24,Air-Tight

DIMENSIONS:

• ID 2 Inch, OD 2 1/2 Inch; Thickness 1 1/2 Inch
• Cut out: 2 Inch to 2 1/8 Inch
• Junction Box Dimensions (with driver inside): 3 3/4 Inch x 2 Inch x 1 3/4 Inch

Suitable for wet locations and soffit installations.